WM2350HSC LG Washer - Parts
Jump to:
Keep searches simple, eg. "belt" or "pump".
$43.95
Water and detergent travel from the dispenser into the washer tub through this flexible rubber dispenser hose. Its bellows folds allow the hose to flex as the tub moves during operation, helping maint...
In Stock
Order now and your part arrives by Nov 28
On Order
$276.32
This rear drum support, also known as a spider or spinner support, is a critical structural component in select washing machines. Featuring a triangular design with three metal arms, it securely holds...
In Stock
Order now and your part arrives by Nov 28
$38.45
The removable filter and cap assembly provides access for routine cleaning and seals the filter opening when tightened. Replace the damaged assembly to restore the debris trap and sealed access point....
In Stock
Order now and your part arrives by Nov 28
$57.30
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
Special Order
$26.19
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Special Order
$32.95
Spring tension holds the washer door boot securely against the front panel with this metal retaining clamp assembly. The ring fits around the flexible rubber seal, helping keep its outer edge seated d...
In Stock
Order now and your part arrives by Nov 28
In Stock
Order now and your part arrives by Nov 28
$16.45
This hose clamp applies pressure around the hose end, holding it firmly against its fitting during operation. A secure hose connection helps keep water contained inside the appliance. This OEM part is...
In Stock
Order now and your part arrives by Nov 28
$23.05
Drain residual water before cleaning the pump filter with this washer cleanout hose. The flexible rubber hose attaches to the drain pump filter housing, giving remaining water a controlled outlet from...
In Stock
Order now and your part arrives by Nov 28
$23.05
This short washer shipping bolt assembly protects the wash tub during a move. It holds the suspended tub securely in place, limiting movement that could damage internal parts during transport. The bol...
In Stock
Order now and your part arrives by Nov 28
In Stock
Order now and your part arrives by Nov 28