KHWV01RSS0 KitchenAid Washer - Parts

This hose goes from the drain pump to the back of the washer.

This part is the replacement detergent dispenser drawer for your washer. It is made of white plastic and is approximately 11 inches long, 6 inches wide, and 5 inches deep. The detergent dispenser is f...

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

This drive pulley attaches to the back of the washers drum.

This water level switch senses the level of water in the inner tub.

Keep your washer running smoothly with this suspension spring set, which includes two springs made to steady the outer tub during wash cycles. If your machine has been shaking or making more noise tha...

This kit includes both the upper and lower shipping bolts. 4 in total.

This part helps with the tumble and spin cycle. If your motor won't run in either the wash or rinse cycle or if the fuse on the board is blown, then you have to replace this part. The fuse is not sold...

Sold Individually.

This part is used to drain water into your sink.