11084419700 Kenmore Washer - Parts

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

It connects from the pump to the back panel. The clamp is not included.

This agitator cam kit contains an almost three inch white retainer and four agitator dog ears. This kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover).

Sold Individually.

This is used in your direct drive washer that has a neutral drain.

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

This hose clamp is sold individually.

This drive block connects the spin basket to the drive shaft in large-capacity washers, allowing proper spinning during cycles. At 2-5/16 inches high, it’s easy to install with basic tools. Replace if...

This part is used to activate the lid switch when the lid opens/closes.

This seal is for the top of basket drive tube shaft.

This is the bearing for the lid hinge. Sold individually.