Models > 11046752700 > Instructions

11046752700 Kenmore Washer - Instructions

Jump to:

All Instructions for the 11046752700

Customer:: LAURA from SPARTA, KY
Parts Used:: 280187
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

washer not drain or spin

it was a really easy fix. unclamped the 2 hoses and took out screw, removed water pump. Connected two hoses back and set in place then screwed in locking screw. could not have been any easier.

6 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: JOHN from BODFISH, CA
Parts Used:: WPW10415587
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Suds and F35 error

Starting getting these errors...but we had also been washing about 300 towels a week from our gym for about 3 months. I contacted an ex-sears repairman friend of ours for advise. He first recommended checking the pump filter basket. It was easy to get to by taking off the front panel. It did have about three hand wipes and other debris in it. Removing these items did cause the errors to occur less often, but they still did continue. We had our repair friend come over and go through the diagnostics checks as per the instruction sheet that was on the inside of the washer. It came down to being the pressure sensor. After replacing the sensor, the washer has worked flawlessly.

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dan from STOCKBRIDGE, MI
Parts Used:: WPW10415587
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Getting “sud” or “F35” errors intermittently

Removed 3 screws from back of top panel, slid top off, twisted APS sensor 90 degrees, popped out of mount, removed hose and elect. connector, replaced with new APS sensor and reinstalled. Ran diag test, passed with no issues.

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: mark from MOUNT HOLLY, VT
Parts Used:: WPW10415587
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

suds mesdsage apperared with f-35 error alert

Peace of cake! 3 screws at top of washer to gain access.
Unplug sensor, but first have to rotate sensor 90 degrees to release from bracket. unplug black tiny hose and plug wire from sensor. Install new in reverse order.
works great and saved a lot of cash doing it myself.
Grateful for the info for the tips from other's with same problem!
Mark from Vermont
Happy Camper:)))))))))

.

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gopaul from Queens, NY
Parts Used:: WP8182119
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Bellow was damaged,water leakage.

First,we took apart the front of the washer and then we removed the old bellow and put the new one on.After we put back up the front of the washer and open the door to put the clamp on then after we unlocked it.After it was working good as new.

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Martin from Kotzebue, AK
Parts Used:: 280187
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Pump not draining the water out.

First I made sure the washer was unplugged from the outlet and I took out 3 screws that held the front panel and removed it to get access to the pump.
I disconnected the electrical plug to the pump and there were 3 phillips head screws that held the pump in place that needed to removed. Pulled out the old pump and slide the new one in it's place with no prorblems. Tighten the 3 screws on and plugged it back in and away we went washing clothes again.

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Helen from NASHUA, NH
Parts Used:: WP89503
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Leaking water inlet hoses.

Removed the old hoses and screwed on the new hoses.

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: anthony from EASTPOINTE, MI
Parts Used:: WPW10003250
Difficulty Level:: Very Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

I was getting a sewer smell when the washer drained I did every cleaning technique and didn't solve the problem then I cleaned the inside drain hose and that helped so I replaced the hose and problem solved.

I removed the back panel to access the top end of the hose then I removed the lower front panel to access the lower end of the hose that attaches to the pump. The hose is secured with spring clamps and they were removed with pliers, the panels are secured with screws.

I replaced the hose and reinstalled the panels and I was done.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Darrell from Lady Lake, FL
Parts Used:: 280187
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Pump not working

Replaced pump

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Day from Basking Ridge, NJ
Parts Used:: WP8182233
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Baffle was worn out/broken

No instructions needed. Very easy to replace. You guys are great! Much cheaper than others and delivered next day! You are now on my "favorites"!

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gerald from Douglas, AL
Parts Used:: WP8182119
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Replace Bellows between door and tub

Remove top and front
Care taken to unplug door wiring
should have taken notes or photos where srews go and order
remove old bellows large hose clamp and sping tensioned clip
clean surfaces
install new bellows on tub only
put all panels and door together
Connecting wiring to door and strain relief takes 2 people
connect bellows to door with spring clip

5 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Anthony from JACKSONVILLE, FL
Parts Used:: WP8183202
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Broken hinge

Removed door from washer, remove hinge from door. Then slip in hinge and tighten hinge to door. Then attach door. It works and the most important thing the wife is happy

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: claude van from big sandy, TN
Parts Used:: WPW10388414
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

tub would not turn

take the back cover off and put belt on. the belt is a tight fit and requires sone effort, but can be done.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: JOHN from OMAHA, NE
Parts Used:: WPW10467168, 280187
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

PUMP HOUSING LEAKS

REMOVE AND REPLACE. FLEXIBLE RUBBER CONNECTOR WAS NOT A EXACT REPLACEMENT, THE ORIGANIL HAD A BACK STOP VALVE, NOT SURE OF THE EFFICATE ON MACHINE.

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Christopher from MORGAN HILL, CA
Parts Used:: W10902779, WP8182210, WP8182119
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Socket set

Torn bellow lip

Replace bellow with help from Youtube video.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 11046752700