11047091602 Kenmore Washer - Parts

This hose attaches to water pump assembly. NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.

This hose goes from the drain pump to the back of the washer.

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

This hose can handle hot or cold water and is five feet long.

This drive pulley attaches to the back of the washers drum.

This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...

This part attaches to the door and fits into the door lock when the door closes.

This water level switch senses the level of water in the inner tub.

This kit includes both the upper and lower shipping bolts. 4 in total.

Sold as a pair.