11047781701 Kenmore Washer - Parts

This is the replacement bellow clamp for your washer. It approximately 16 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place on t...

This hose attaches to water pump assembly. NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.

This hose goes from the drain pump to the back of the washer.

This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and the washing program begins.

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

This hose can handle hot or cold water and is five feet long.

This door lock/latch assembly is a genuine OEM part for front-load washers. It keeps the door securely closed during wash and spin cycles, ensuring safe operation. A damaged lock can prevent the washe...

This part attaches to the door and fits into the door lock when the door closes.

This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...

This drive pulley attaches to the back of the washers drum.

Keep your washer running smoothly with this suspension spring set, which includes two springs made to steady the outer tub during wash cycles. If your machine has been shaking or making more noise tha...