11047798800 Kenmore Washer - Parts

This hose attaches to water pump assembly. NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.

This hose goes from the drain pump to the back of the washer.

This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and the washing program begins.

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

This hose can handle hot or cold water and is five feet long.

This part attaches to the door and fits into the door lock when the door closes.

This drive pulley attaches to the back of the washers drum.

This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...

Keep your washer running smoothly with this suspension spring set, which includes two springs made to steady the outer tub during wash cycles. If your machine has been shaking or making more noise tha...

This kit includes both the upper and lower shipping bolts. 4 in total.

Sold individually.

Sold Individually. Order quantity needed.