11084419110 Kenmore Washer - Parts

It connects from the pump to the back panel. The clamp is not included.

This agitator cam kit contains an almost three inch white retainer and four agitator dog ears. This kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover).

This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...

This is used in your direct drive washer that has a neutral drain.

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

This hose clamp is sold individually.

This drive block connects the spin basket to the drive shaft in large-capacity washers, allowing proper spinning during cycles. At 2-5/16 inches high, it’s easy to install with basic tools. Replace if...

This part is used to activate the lid switch when the lid opens/closes.

This kit comes with springs, hardware, and brake lining.

This seal is for the top of basket drive tube shaft.

This is the bearing for the lid hinge. Sold individually.

Found on the water inlet valve.