1105142512 Kenmore Washer - Parts

This drive block connects the spin basket to the drive shaft in large-capacity washers, allowing proper spinning during cycles. At 2-5/16 inches high, it’s easy to install with basic tools. Replace if...

This gray and white washer lid bumper contains a rubber bottom and is sold individually.

The drain hose carries used water from the washer to your house drain.

This is the bearing for the lid hinge. Sold individually.

This spanner nut secures the inner tub to the drive block in large-capacity washers. With a right-hand thread, it prevents movement and vibration during operation. Replace if worn or loose for proper performance.

Sold individually.

This control knob is for dryers. Control knob lets you control cycle settings. Remove the knob by pulling it straight off its post.

11-16 x 3/4 Sold individually.

The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands