GWS645RBS0 Gibson Washer - Parts

This part is used to activate the lid switch when the lid opens/closes.

Clamp used for hoses.

This pump sucks the water out of your washers tub with one of its valves, and drains the water into a drain hose with the other valve.

Holds plated on Trunion .312-18 x 1.625.

Sold Individually.

This spacer goes between the timer knob and the dial.

This is the bolt (screw) that holds the agitator in place.

This part helps with the spinning and agitating cycles.

Use in conjunction with the agitator screw.

This clip is less than an inch long.