54298117 General Electric Washer - Parts

This plastic clip is a genuine OEM part, used to help connect the timer knob to the shaft on your washer. If the clip has become damaged it will need to be replaced. The clip is found on the backside ...

This part is the replacement timer knob for your washer. It is made of white plastic and is about 1 ¼ inches in diameter. The timer knob sits on the timer shaft and allows you to choose the wash cycle...

This compression ring works in conjunction with the timer dial.

This washing machine pump is white in color and has four ports for water to pass through.

This coupling is used for 20 spline drive shaft transmissions.

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.

This friction snubber pad is an inch and a half long.

This seal goes to bottom of the transmission to stop oil from leaking at the bottom of the appliance.

This levelling leg is less than three inches long.