GTW330ASK2WW General Electric Washer

There are two lid clips on the front side of the top and a narrow blade putty knife works great to release the clips. There are 4, 1/4 in hex head screws in the back area of the top, two on each side. Two are in the console and two are under the console. Hello Patti, thank you for writing. We have a previous customers testimonial: Pay attention to the orange pressure switch hose, when lifting the Console, can pull this hose off, this hose can be pulled off easily. The lid/lock switch is easy to remove, once the Bezel is removed, then slide the switch to the left it will release. Remove and unplug the harness. The new lid/lock switch clips back in the same manner it was removed. Important! When the new switch arrives it may not look like the old one. The Lid Lock Assembly is part FIX16554755. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Jerry, Thank you for the question. This could be caused by a slow spin. If the appliance is not making any loud or unusually sounds, you may have a faulty Speed Sensor. The speed sensor sends information to the control panel and is able to adjust the speed up or down. A new speed sensor might be needed if the washing tub is turning too slowly, or is not turning at all. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Jerry, thank you for your question. This nut is 1 11/16" and is a Left Handed Nut. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Jerry, thank you for writing. You may need to reset the motor. Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. The motor has now been reset and is ready for you to start a cycle. Or, the problem could be loose or broken belt FIX11767488. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Maurice, thank you for contacting us. We have researched the model you have provided and have found that the two suspension rods are available in the washing machine with these part numbers, FIX12343379 and FIX12343378. We are glad to be of assistance!