Models > WJSR2080T2WB

WJSR2080T2WB General Electric Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WJSR2080T2WB

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
This split ring is two inches in diameter.
No Longer Available
In Stock
Order now and your part arrives by Apr 6
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
In Stock
Order now and your part arrives by Apr 6
No Longer Available
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
No Longer Available
In Stock
Order now and your part arrives by Apr 6
$15.26
Sold individually.
In Stock
Order now and your part arrives by Apr 6
This part is for the hose to outer tub.
Special Order
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
No Longer Available
$15.26
Special Order
In Stock
Order now and your part arrives by Apr 6
This lid covers your washing compartment, please advise your owners manual for instructions on how to install.
Special Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for WJSR2080T2WB

Viewing 3 of 3
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stephen from Woodbridge, VA
Parts Used:
WH12X1043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Lid switch failed
First removed front washer access panel.
Next: removed top panel torx screws and disconnected lid switch wiring connector
Next: removed washer top/lid
Next: removed inoperative lid switch (two phillips head screws)
Next: installed new lid switch and screws
Next: installed washer top and connected lid switch wire c onnector
Next: installed control panel and screws
Next: tested installation
Next: installed front washer access panel
Easy repair. FYI, Parts Select had best price and part arrived within two days of ordering! Highly recommend them for your parts.
35 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Reginald from Franklin, VA
Parts Used:
WH12X1022
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Would Not Turn On
The two tabs that went under a stamped area of the frame were broken off the timer allowing it to move away from its mount when the switch was depressed. The new timer took care of the problem. A shame that a perfectly good timer had to be trashed because the plastic tabs broke off probably because of too much pressure exerted on the ti mer button.
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Selena from Woodstock, GA
Parts Used:
WH12X1022
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)
Spin cycle stopped working
Front panel came off fairly easy then part just unplugged from main unit. It was very easy to fix. My wife first found the part at a Sears repair store and then started searching for the part for a lower cost. She came upon Part Select and found the part was not only lower but also the shipping time was less. After reading all the posi tive reviews we decided to give this company a try. She ordered the part on a Sunday afternoon and it was at our front door by Tuesday afternoon. We were so thrilled with the service and speed from PartSelect that we saved in our favorites. Would recommend this company to anyone.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!