Models
>
GTWP1800D0WW
GTWP1800D0WW General Electric Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GTWP1800D0WW
Viewing 4 of 4
Manuals & Guides for GTWP1800D0WW
Click to downloadInstall
Installation Instructions
(1.65MB)
Manual
Owner's Manuals
(4.69MB)
Manual
Owner's Manuals
(4.05MB)
Manual
Owner's Manuals
(1.90MB)
Keep searches simple, eg. "belt" or "pump".
$9.61
This is a single tub dampening strap for a washer. It is recommended to replace all 4 tub dampening straps at the same time, to ensure even wear. This part supports the tub and minimizes vibration by ...
In Stock
$14.33
This is a genuine OEM replacement timer knob for your washing machine that is white in color. Replacing this part is a simple repair that only requires a pair of needle nose pliers. We suggest disconn...
In Stock
This knob and clip set is an OEM replacement part for your washer or dryer timer. It is common for this plastic knob to break around the shaft, or for the retainer clip inside the knob to go missing, ...
In Stock
$9.01
This clip fits inside the control knobs for your laundry machines, and helps to securely fasten the knob to the shaft, which allows you to easily turn the knob to select the correct settings. This is ...
In Stock
$11.00
This plastic clip is a genuine OEM part, used to help connect the timer knob to the shaft on your washer. If the clip has become damaged it will need to be replaced. The clip is found on the backside ...
In Stock
$27.09
This is a genuine OEM drain hose for your top-load washing machine. It is made with a flexible and corrugated black material, and measures 57-inches in length. The purpose of the drain hose is to move...
In Stock
$75.31
This is an authentic agitator for your washer, responsible for moving clothes inside the tub. Please note, it does not come with the fabric dispenser, so you will need to either transfer the old one t...
In Stock
$14.29
This timer dial with compression ring is a genuine OEM part for your washer. The dial is made of plastic and is white in color. It can be found on the timer shaft underneath the timer knob, and it fea...
In Stock
$16.73
If your washer is leaking when it is filling or agitating, you may need to replace the tub seal. The tub seal is found between the transmission and the outer tub in your washing machine. This genuine ...
In Stock
In Stock
$25.75
This is a 6-rib washer drive belt. It is sourced directly from the original manufacturer and constructed with a durable Poly V material. This part connects the drive motor to the drive system that tur...
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GTWP1800D0WW
Viewing 10 of 10Leaking
Fixed by these parts
How to fix it
Will not agitate
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
No hot or cold water
Fixed by these parts
How to fix it
Marks left on clothes
Fixed by these parts
How to fix it
Spins slowly
Fixed by these parts
How to fix it
Touchpad does not respond
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
-
Customer:Charles from Dallas, GA
-
Parts Used:WH01X10310
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Control knob teeth were worn
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Irina from Englewood, NJ
-
Parts Used:WE01X20378
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
The original Knob just fell apart
The repair was so easy when I got the part, I did it myself without any help in 5 seconds!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Brian from Millerplace, NY
-
Parts Used:WH12X10334
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
washing machine would not go through all cycles or agitate
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
Was this instruction helpful to you?
Thank you for voting!