GLWN5050M0WS General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- j. from naples, FL
- Parts Used:
- WH12X10412
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
the machine didnt stop filling up automaticly. them only pump out only
to Diagnost was necessary to open the control and front panel,replace motor fuse,finally,replace water level relay(load size switch).the machine is working like new!thanks PARTS select.com!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from New Haven, CT
- Parts Used:
- WH01X10302
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench (Adjustable)
Nothing bad, just a VERY tight belt.
Take front of machine off, unscrew bottom and lay out just enough to get under the machine you do not have to take it completely off. After that unscrew center bolt holding wheel and wrap belt around then attatch the belt to the power spinner pull down as best you can and reattatch the wheel and bolt back up.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOSE from DAYTON, TX
- Parts Used:
- WH12X10334, WH23X10030
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
washer was not agitating and leaving clothes soaked.
I didn't do the repair my wife did! She watched the video and did it exaclty the way it was shown. It took her about 25 minutes to do it. Now she wants to see if she can fix a fridge that is in the garage.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cathy from WARMINSTER, PA
- Parts Used:
- WH41X10096
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Leaking hose
Was very easy to remove and replace. The instructional video let me know what to expect
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gwen from Hot Springs Village, AR
- Parts Used:
- WH41X10096
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked Leaking Drain Plastic Hose
Unit unplugged. Next day delivery, saved plastic clip and two screws from hose connect to washer , removed leaking hose ,replaced with new hose fully pushed into unit with plastic clip already in place on new hose. Tightened screws on plastic holding clip on new hose. Done complete job in 5 minutes.
Was this instruction helpful to you?
Thank you for voting!