WSXH208A0WW General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Juan from Clermont, FL
- Parts Used:
- WH17X10001
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
broken drum shocksre
Rplateemoved back cover plate aprox 15screws
removed wire harnes to get acces to pins holding
shocks 4pins reinstall pins put wire harnes and
back cover plate and walla my wife reward me for
a job well doen
removed wire harnes to get acces to pins holding
shocks 4pins reinstall pins put wire harnes and
back cover plate and walla my wife reward me for
a job well doen
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Fairbanks, AK
- Parts Used:
- WH01X10022
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broken Tub Spring
unplug power, remove top four screws, remove spring hold down clamps two screws each side, remove broken spring. install new spring (one end is bigger then the other) bigger end on tub, use string to lift spring into place, replace top all done. (tip use a string to pull tub spring into place much faster then trying with pliers just run string through hole where spring mounts and lift into place) All done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- giuseppe from sarasota, FL
- Parts Used:
- WH23X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Did not drain or spin
Removed old pump and re installed a new one,took no more than 20 minutes,the hardest part was re connecting the trap- hose and the drai n,very easy .Just unscrew the two screws holding the pump and replace it with the new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tammy from Somersworth, NH
- Parts Used:
- WH10X10004
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken door latch on front loader machine
The part was exactly what we needed and came sooner than we expected. It was easy to fix and we avoided hiring a repair man.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Washington Courthouse, OH
- Parts Used:
- WH10X10004
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
One part of the catch broke off from the main unit.
This repair was incredibly easy - I simply unscrewed the broken catch and installed the new one in its place, using the same screws. The entire process took about five minutes; the hardest part was finding a Phillips screwdriver in my house! Also, I commend Part Select for the prompt, courteous service. When I called, I was connected to an actual person - not a machine - who was very helpful, and the part arrived within 36 hours after the order, without any express mailing services.
Was this instruction helpful to you?
Thank you for voting!