WJSR2080T8WW General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jon from Merriam, KS
- Parts Used:
- WH12X1022
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Washer would not complete the cylcle, it stop in the middle
I was going to buy a new washer and dryer, then the opportunity came up to buy the house instead, so I opted for the repair. It was very simple. I had four small torx bolts to get to the control panel, a small screw that i took out with a nutdriver to take the timer out and a phillips head screw driver to loosen the ground. It was simple and quick, and very cheap, considering my options.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Yorktown, IN
- Parts Used:
- WH1X2721
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broke the knob.
I used a pair of pliers to turn my dryer on until I broke the center part where the knob went. I order the part that was in the dryer first and it came the next day. When it got here I realized I still needed the knob. It came the next day also. It took my handyman about 15 minutes to replace both and he also cleaned out all of the missing socks and other items behind my dryer. Good Job!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marlene from Sutter Creek, CA
- Parts Used:
- WH12X1022
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Wrench (Adjustable)
.Unable to use machine because selection knob was loose.
Removed control panel. Knob was difficult to remove and a wrench was used to remove. Connecting the wires to the new timer was easy
Was this instruction helpful to you?
Thank you for voting!