WDSS4120A0WW General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jason N. from Beaumont, CA
- Parts Used:
- WH12X10183
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
washer would`nt agitate.If you wigled the timer it would work.
I removed the 2 screws on the very {top rear} of the washer. Then pulled the three ince wide plate off . {Its 3" wide but goes across the full width the the washer.} Then pull forward on the top of the washer to expose the back of the timer. Remove one more screw and unplug the timer.{ the timer has instuctions on removing the knob taped to the rear of the new timer.
Was this instruction helpful to you?
Thank you for voting!