GTW325ASW0WW General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ronald from Chickasha, OK
- Parts Used:
- WH23X28418
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Washer wouldn’t drain
Remove old pump install new one. Three bolts and an electrical connection
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brandon from Anderson, CA
- Parts Used:
- WH01X27538
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Clothes very wet at end if cycle
Pulled the washer away from the wall and tipped it back. Removed 3 screws holding the belt cover on. Pulled the old belt off and found it was stretched and coming apart. Put the new belt on the small pulley and put a small screwdriver between the large pulley and belt. Rotated the large pulley to get the new belt fitted. Reinstalled the belt cover and put the washer back. Problem fixed
Was this instruction helpful to you?
Thank you for voting!