Models > NTW4011SW0WW > Instructions

NTW4011SW0WW General Electric Washer - Instructions

Jump to:

All Instructions for the NTW4011SW0WW
46 - 46 of 46
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Brandon from Anderson, CA
Parts Used:
WH01X27538
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Clothes very wet at end if cycle
Pulled the washer away from the wall and tipped it back. Removed 3 screws holding the belt cover on. Pulled the old belt off and found it was stretched and coming apart. Put the new belt on the small pulley and put a small screwdriver between the large pulley and belt. Rotated the large pulley to get the new belt fitted. Reinstalled the belt cover and put the washer back. Problem fixed
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the NTW4011SW0WW
46 - 46 of 46