Models > WLCD2050B0KC > Instructions

WLCD2050B0KC General Electric Washer - Instructions

Jump to:

All Instructions for the WLCD2050B0KC

Customer:: Lucas from hastings, MI
Parts Used:: WH49X10042
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

washer would not agitate

The part came very fast and was easy to install, I pulled off the agitator and removed one bolt, replaced worn out part with new part and put the new bolt that came with the part in. Reatached the agitator and washed some clothes. done

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jesus from Casa Grande, AZ
Parts Used:: WH23X10030
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Wrench set

Water was not draining from washer

My wife calls me and says that the washer is not draining water so I was like "great"...here goes more money. After I tried draining, cleaning, checking for leaks, I looked up possible causes and came across the water pump. I have bought from parts select and I love this website so I jumped on here, found the causes, diagram, installation videos, and cheap parts. Added to cart, paid, and was here in about two days. I disconnected the electricity, opened the front lid, took off the two hoses, unscrewed the pump, swapped in the new one and hooked it back up. The washer works like new, took me about 10 minutes. Thanks Partselect!!!!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Leisha from Trinity, NC
Parts Used:: WH49X10042
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Wrench (Adjustable)

Washer would fill and drain, but not agitate the clothes, I kept getting a pile of laundry soap in the bottom of the washer and left with dirty clothes

Removed the screws, pulled out the tall skinny thing that rotates, pulled out the broken part, ordered the new one, replaced it, (you have to push down until it snaps into place) Put everything back together and had clean laundry within 45 minutes. Anyone can replace this part.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Silver Spring, MD
Parts Used:: WH23X10030
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers, Socket set

Washer not empyting

Removed front cover, disconnected wires and hoses, reversed process

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Cumberland, MD
Parts Used:: WH01X39337
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Would not completely drain all the water out of the tub after the final rinse cycle, with a burning smell from the belt because it could not turn properly.

I followed previous parts select customers advice exactly, of replacing the dampening straps, and it worked perfectly. Thanks-A-Million!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Marci from Salt Lake City, UT
Parts Used:: WH49X10042
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Socket set

GE Profile Washer would not agitate but would still spin, etc.

I used the "belt" technique to remove the agitator. It was difficult at first to remove but after a few tugs on the belts that were looped under the plastic bottom, the agitator came up. Then I unscrewed the bolt holding the coupler. The agitator coupler kit purchased from PartSelect came with a new screw so I replaced the old coupler with the new one and fitted the new screw in it's place. I put the agitator dasher back on and then it worked perfectly.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mike from Edina, MO
Parts Used:: WH49X10042
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Socket set

washing machine quit agitating

took the two screws that holds the instrument selections off retreived the directions from inside this panel and followed directions step by step and removed the spline that makes the machine agitate, seen that the inside of the spline was smooth, ordered part and reversed operation in putting it back together.
p.s. make sure the refill shutoff hose is connected as we had forgot to do this and we ran water on the floor, had to take back apart and re-connect thehose .

ordering the part and fixing it myself with my sons help saved me a repair bill which I am sure would have cost me at least $75.00 more.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: kenneth from mazeppa, MN
Parts Used:: WH01X39337
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

broken dampening straps

removed front of washer and removed top of washer very easy to replace 4 dampening straps (2 straps were broken replaced all 4

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Walter from woodland, CA
Parts Used:: WH01X39337
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Socket set

3 of the 4 dampening straps were broken.

Watched the video from your web site and followed the instructions. Didn't need to remove the console on my model.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: daniel from walkersville, MD
Parts Used:: WH23X10030
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers, Socket set

tub wouldn't drain

Easiest thing I ever did on the computer. U tube helped me diagnose the problem and how to remove the old pump and install the new. Parts Select menu was easy to navigate and had a picture of the pump I needed. The cost was affordable and I got the satisfaction of making the repair myself.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Roger from ORO VALLEY, AZ
Parts Used:: WH01X39337
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Broken straps

replaces as per video. Very helpful

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: joel from mt vernon, IL
Parts Used:: WH01X39337
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set, Wrench (Adjustable)

two tub dampening straps snapped

I just watchied the clip on the website during the day about how to fix it, went home that night and fixed it.

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Scott from Meriden, CT
Parts Used:: WH23X10030
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers

Washer wouldnt drain

First I removed the front cover, Drained out water by hand, Romoved two drain hoses going into old pump,removed the electric very easy it was two wires,installed new pump and reconected all. Now my wife is happy again and so am i. Your installation video was the KEY to my success.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: larry from Steamboat Springs, CO
Parts Used:: WH01X39337
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

broken tub strap

follow youtube vid. simple

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dale from Wrightwood, CA
Parts Used:: WH23X10030
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Socket set

wouldn't pump water

I followed the step by step video on how to install the pump..I am 70 years old and female..it was very easy to install..your company is A+..sure liked the savings doing it myself..

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the WLCD2050B0KC