Models > YTW4514PN2DG > Instructions

YTW4514PN2DG General Electric Washer - Instructions

Jump to:

All Instructions for the YTW4514PN2DG
31 - 35 of 35
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jim from MUKWONAGO, WI
Parts Used:
WH23X28418
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Washing machine would not drain
I replaced the Pump Drain assembly. It was very easy. Removed 3 bolts and disconnected the electrical wire harness and put new one on. It works great.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from ALTON, IL
Parts Used:
WH01X24180
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Belt frayed tangled stopped spinning
Tilted washer got underneath took off plastic shroud 3 nut head bolt rotated belt onto pulleys easy peas when ya buy the part from this site :) perfect match no assy issues
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from Chickasha, OK
Parts Used:
WH23X28418
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Washer wouldn’t drain
Remove old pump install new one. Three bolts and an electrical connection
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Heath from BOILING SPGS, SC
Parts Used:
WH01X24180
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Noisy
Took bottom cover off think three bolts
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debbie from Kalispell, MT
Parts Used:
WH43X31240
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The washer agitator/auger broke off of the base during a wash cycle. The small plastic clips broke off the auger so it couldn't be put back on the base.
The agitator/auger was easy to replace - it just snapped into place. We watched a YouTube to make sure to lock it into the counter clockwise direction.
This saved lots of time and the cost of a repair person to come.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the YTW4514PN2DG
31 - 35 of 35