Models > WGC1586NXWW0

WGC1586NXWW0 General Electric Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Water Valve with 2 Inlets and 3 Outlets – Part Number: WH13X10029
$123.87
This is the replacement water valve for your washer. It has 2 inlets and 3 outlets. The water valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water e...
In Stock
Order now and your part arrives by Jun 6
NUT M16 – Part Number: WH02X10211
No Longer Available
SIPHON_PIPE – Part Number: WH41X10112
$15.26
In Stock
Order now and your part arrives by Jun 6
LIQUID DETERGENT INSERT – Part Number: WH41X10138
No Longer Available
DRAWER LATCH LEVEL – Part Number: WH01X10245
$15.26
In Stock
Order now and your part arrives by Jun 6
SOFTENER BLEACH COVER – Part Number: WH41X10155
$29.98
In Stock
Order now and your part arrives by Jun 6
BLEACH INLET WATER HOSE – Part Number: WH41X10157
$31.05
Special Order
MAIN INLET WATER HOSE – Part Number: WH41X10156
No Longer Available
HOT INLET WATER HOSE – Part Number: WH41X10158
$34.27
Special Order
DRAWER – Part Number: WH41X10302
$73.24
Special Order
MAIN BOX SUB – Part Number: WH41X10303
$104.77
Special Order
CABINET_REAR_COVER – Part Number: WH46X10132
$80.13
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WGC1586NXWW0

Viewing 2 of 2
Leaking
Fixed by these parts
Fixing
How to fix it
No hot or cold water
Fixed by these parts
Fixing
How to fix it
Replacing the Water Valve with 2 Inlets and 3 Outlets

Replacing the Water Valve with 2 Inlets and 3 Outlets

Replacing the DRAWER LATCH LEVEL

Replacing the DRAWER LATCH LEVEL

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Miguel from Jacksonville, FL
Parts Used:
WH13X10029
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
The washer stop and blinks in the RINSE MODE
I called a repair person to check my 15 months old GE front loader washer that stopped in rinse mode. After his inspection he said it was a deffected computer board and it would be very expensive to replace the 3 computers boards inside and it would be cheaper to buy a new top loader washer. The next day I lifted the top cover and foun d a taped plastic envelope with instructions titled “For service Technicians Only." On page 2, instruction on to how to enter the washer in to service mode and to test the washer:
Press : Signal, Delay, Signal, Delay (within 30 seconds of plug in washer)
Then rotate main knob to #102 and press Start:(the washer did a test for finding the problem) , and for me was : E22 , it means : replace solenoid valve assembly.
So I order the part from Partselect.com for $58.00 and my Washer runs beautiful, thanks to the instructions inside.
Read less
57 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Felipe from Houston, TX
Parts Used:
WH13X10029
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
stops at rise
removed 5 screws, unscrew two more screws, remove the houses and disconnect the wires remove the watter valve.
12 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
christopher from MINNEAPOLIS, MN
Parts Used:
WH13X10029
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
washer would stop at certain points in cycle
Replace the water valve according to the youtube video from this site. It was really easy!
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More