GTW540ASP4WS General Electric Washer - Parts

This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram f...

This replacement water inlet valve ensures accurate control of hot and cold water entering your washing machine. It plays a key role in maintaining proper water levels for each cycle. If your washer w...

If your washer isn’t spinning or agitating like it should, this shift actuator might be the fix you need. It helps your machine switch between wash and spin cycles, and is usually found underneath the...

Grinding, vibration, or poor basket movement can point to a damaged clutch spring, but other drive-system faults may cause the same symptoms. The spring helps the clutch engage during agitation and sp...

The Control Knob lets you control the selections for your appliance. Remove the knob by pulling it straight off its post.

This genuine OEM lid lock and striker is designed for washing machines. The lid lock comes with the wiring harness and striker, which is a small plastic piece attached to the lid of the washing machin...

This impeller sits at the bottom of the washer tub and helps move clothes through the water for better cleaning. It’s a common fix for poor wash results or noisy cycles. Be sure to unplug the washer a...