GMR05BLHCSCA General Electric Washer - Parts

This cover goes on top of the balance ring that is located on top of the basket.

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.

This part helps prevent the backflow of water from the tub to main water line.

This is a genuine hex head screw replacement, designed for use with dishwashers. Most of this type of screw is used to hold the kickplate in place on the bottom of your appliance. This screw is sold i...

Screws NOT included.

This part holds the water during the wash cycle and houses the spin basket.

The drain hose elbow carries water from the sump to the drain pump. If the waste water is not draining from the dishwasher, there could be an issue with the drain hose elbow. Check the drain hose for ...

This fill funnel service kit directs water accurately into the system to prevent spills or misrouting. Proper flow improves reliability and system efficiency. Replacing a worn funnel restores accurate...