Models > FAFW3921NW1 > Instructions

FAFW3921NW1 Frigidaire Washer - Instructions

Jump to:

All Instructions for the FAFW3921NW1
121 - 135 of 209
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Fabian from New Port Richey, FL
Parts Used:
131763256
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Did not spin
Followed your instruction,simply removed the top cover and the two screws on the door to remove the switch assembly. Unplug old part and replaced with the new one after pluging three wires. I saved $105.00, which was the quote from a repair shop. Thank You for your great service and directions; the part arrived a day after I had ordered, did not pay extra for special delivery.
Was this instruction helpful to you?
Thank you for voting!
Customer:
edward from ottawa, IL
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Plastic on door broke.
Removed two screws, installed new piece.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Regina from Milton, WV
Parts Used:
131763256, 131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Front load washer would not spin
First we took the pump off and it was full so we hoped replacing it as the fan blades were broke and it didn't help. We replaced the control board and that didn't change it either. So I checked here and the door strike and door switch could be the problem so I ordered and put them on that was the problem. Thanks so much. Instructions were well printed and the job was about 5 minutes to replace. The washer works perfectly. We should have started with these parts first and it may not have cost so much.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Brillion, WI
Parts Used:
131763256
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Washer would not go into spin cycle
1. Remove the spring clamp around the tub seal. 2. Pull back the tub seal in the area by the door lock switch. 3. Remove the switch assembly by removing two Phillips screws. 4. Remove connectors from switch. 5. Install connectors onto new switch. 6. Mount new switch on washer with two Phillips screws. Reinstall tub seal making sure to tuck it correctly on the washer frame. 7. Reinstall spring clamp.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jennifer from League city, TX
Parts Used:
131763256
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Machine wouldn't spin
Removed 2 screws , unplugged the old switch , replaced with new one and secured with screws . Easy !!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kamlyn from Huntington Becah, CA
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
latch to door broke and would not stay shut
I unscrewed the two screws and replaced with new door striker and used the same two screws I took out. It took me seriously less than 2 minutes and I am a woman!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joyce from Mequon, WI
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The door strike broke off so the door would not stay shut
I took off the broken part with a screw driver. I easily found the needed part on your website. After I ordered the part, it came within 2 days. It was the correct part and was replaced within 10 minutes of opening the package. Thanks for the great, easy and quick service!
Was this instruction helpful to you?
Thank you for voting!
Customer:
patricia from portsmouth, NH
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door strike broke due to door being off center
took the 2 screws out, removed the old and screwed in the new.Piece of cake. What stod out in the process was Part selects follow up with email and video of how to replace. They are great....
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doris from Hesperia, CA
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
tip of strike broke off
unscrewed (2) screws, took broken piece off and screwed new piece on with the (2) screws. Keep your old screws because part does not come with screws.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ANDREW from UPLAND, CA
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door latch broke
Easy repair, buy shipping took much longer than advertised!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffrey from Cedar Rapids, IA
Parts Used:
131763256, 131763302
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set
machine would not cycle and would not drain
I read other problems, I jumped the gun and purchased the door switch, this was easy to change, but MY machine still had the same issues, however, I found that the filter was plugged, and after I cleaned this out, this fixed my issues and the machine works fine, So I now have a door switch and striker should mine go bad, Hope this helps out
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joe from San Diego, CA
Parts Used:
131763256
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
washer would not go into full speed spinning
Turned off electricity. Unscrewed top panel. Took off top panel. opened door. Unscrewed door lock. Pulled lock up. Unplugged connections. Plugged in new part, positioned, and screwed in. Replaced top panel
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Hyattsville, MD
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken Door Striker
Removed two phillips screws. Removed old door striker. Replaced with new door striker. Replaced old phillips screws. Job takes less than 1 minute.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lee from Kansas City, MO
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Replaced Door Strike.
Two screws out, two screws in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dulcenee from Bloomington, MN
Parts Used:
131763302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The door strike just broke (who makes a plastic door strike on a machine that gets used as much as a washer?)
This was easy as pie. I unscrewed the old & put on the new. That's it!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FAFW3921NW1
121 - 135 of 209