LAFW6000LW0 Frigidaire Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sheree from Clarksville, TN
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door strike snapped
The door strike on our front loader snapped, thanks to numerous family members slamming the door. I don't know much about repairing appliances, actually, I didn't even know the part we broke was called a 'door strike'. Desperate to regain the use of my washer, I took to the internet superhighway and found PartSelect. PartSelect is such an outstanding shop! Thanks to their forward thinking by using grids, photos to scale, and helpful additional info, I easily found the part I needed (and learned the part's name!). And, my part arrived in one day! On a Saturday! PartSelect will be my go-to shop from now on!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- H. Edward from Sequim, WA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Someone opebed the washer door prior to cycle completion
two screws took off the old plate, replaced the door strike with saame screws
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gene from Atlantic City, NJ
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Latch was broken
Only two screws and it was done,easy repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Allan from Charlestown, MA
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Error Code E43 - door lock problem - no spin
Removed retaining band around door boot and prized-off boot on left side to access door lock - simple screw driver replacement job. Deleted last error code. BUT - washer worked again for several days, and now code E43 is back and won't spin - problem is intermittent - so suspect it is NOT the door lock, but a wiring or control board problem. Ongoing.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Hyattsville, MD
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Door Striker
Removed two phillips screws. Removed old door striker. Replaced with new door striker. Replaced old phillips screws. Job takes less than 1 minute.
Was this instruction helpful to you?
Thank you for voting!
Door would not close
The latch that held the door broke off, and of course the washer would not work , I called around locally and the small part price was outrageous,I went on line and found Pats select,and the price of the part was 1/3 of the cost locally I order the part and even with next day delivery I saved money from buying it locally
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Newhall, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door would not close. Washer would not turn on
I used a screwdriver to screw on the new door strike. Problem solved!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- edward from ottawa, IL
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic on door broke.
Removed two screws, installed new piece.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ANDREW from UPLAND, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door latch broke
Easy repair, buy shipping took much longer than advertised!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darci from Norwalk, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Doors tricker broke
The repair was so easy!!! It took me less than ten minutes to remove the broken piece and to install the new piece. There were 2 screws to remove to get the broken piece off.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- james from egg harbor twp, NJ
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken door striker
first problem is the hinge get worn or broken from being leaned on. second problem is the door gets slammed trying to close it braking the striker. to fix the problem 2 screws for the striker, to permanently fix repair door hinge. and a big thank you for the people who own and or run this site. my order was lost and they got the part to me the next day.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edwin from Cape Coral, FL
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door strike broke
Removed two screws and replaced the door strike.
Was this instruction helpful to you?
Thank you for voting!
Washer didn't start
I took off the top of the washer. It seemed easier than playing with the door gasket. It took about 15 minutes. Everything worked great. The washer is working again. THANKS PARTSELECT
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- teresa from brooklyn, NY
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The top striker tip broke off....
Remove the broken striker, screwed in the new one in less than 2 minutes...this is the second time it was replaced...the first time I was still under warranty...he took about the same amount of time to install ...I ordered 2, because I know it will be broken again....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randall from Doe Run, MO
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Washer would not go in high spin
It is a front load washer with a dryer stacked on top of it.Insaw a video on u tube. I took a neddle nose pliers ang took a spring loaded metal ring off that is holding the grey rubber boot on . I peeled it back just enough to reach ih and get the door lock in hand.I then took a phillip screw driver and removed the two screws un the front off holding the door lock..I then reversed instructions,and put the new lock in.The complete job took lease than 5 minutes,and the part did the trick. My washer works as good as new.
Was this instruction helpful to you?
Thank you for voting!