FAFS4473LR0 Frigidaire Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Philip from Jacksonville, FL
- Parts Used:
- 131763256
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Washer would not spin
easy repair. I went to the back of the washer and removed the two(?) screws that held the top panel on. Then moved to the front of the washer and unscrewed the two screws in the door frame holding the lock assembly. Pulled it up and out from the top of the washer and disconnected the three wire connections. Then I just reversed the process with the new part. It all worked great. This website rocks...
Phil
Jax, FL
Phil
Jax, FL
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffery David from Chesaning, MI
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bkn door strike
Very simple hardly worth writing about.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cheryl from Brandon, FL
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Washer would spin in any cycle
Tilted the washer back to take the 2 screws off the bottom to remove bottom plate. Took the 2 nut screws from the bottom of the face plate so that the front of the washer would pull slightly out from the bottom. Removed the 2 screws from the door stricker plate which allowed the door lock assembly to come out through the side of the washer. Unplugged 3 plugs, plugged the new switch in and slid it back into place, put the 2 screws back in to hold it. Reattached the front and the bottom plate. And bingo done. It worked and saved us about $245.00. Very happy!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard A. from Newnan, GA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Hungry dog ate the door latch on my front-load washer
ordered the part and got the part in three day. A no hassle experience. Installed the latch and eureka! Fixed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from San Diego, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Machine would not start
Unscrew the the bad part, screw on the new part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Cos Cob, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door on washer broke lots of laundry to do!
I was amazed at how quickly my part came for the washer and it came to me on a Saturday
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melissa from Colorado Springs, CO
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door striker was broke
unscrewed the 2screws from the striker on the washer door first. Then put screwed new striker on door with its new screws. It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from edinboro, PA
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
machine would not go into final spin, clothes saturated
with the help of my nephew, we unstacked dryer after power sources were shutoff first. then simply removed the two screw attaching lid on washer. then removed two screws holding switch from front of machine. fished switch up to a visible area, exchanged bad for good. fed switch back to it's home,then reversed assembly procedures. these forums are great and have saved me money by enabling the repair both washer and dryer at a very reasonable cost without the need of a certified repair person.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- donna from gardnerville, NV
- Parts Used:
- 134762010
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
not cycling
put new part did reset on main controles
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Haymarket, VA
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Washer would agitate but not enter spin cycle
Washer error code said control board($200.) but this web site said Door Lock and Switch assembly($80). Web site was correct, thankyou for saving me money and time for the real repair needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Garry from Winchester, IN
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Door Strike
Nothing to it rteall. The great thing was how fast this company got the part to me!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Mequon, WI
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door strike broke off so the door would not stay shut
I took off the broken part with a screw driver. I easily found the needed part on your website. After I ordered the part, it came within 2 days. It was the correct part and was replaced within 10 minutes of opening the package. Thanks for the great, easy and quick service!
Was this instruction helpful to you?
Thank you for voting!
door lock switch assembly bad wouldn't allow washer to start.
Remove the seal ring underneath the front gasket.it's solid wire ring held together with wire spring.I used a screw driver to stretch wire ring from gasket.pulled gasket back from washer opening, near striker. removed two screws on striker lock assembly.pulled it out.removed all three wire attached to assembly.plugged in new assembly.replaced screws. reattached gasket and ring. done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shari from Raleigh, NC
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door strike broke while moving
very easy, just put in the 2 screws and it was fixed..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darci from Norwalk, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Doors tricker broke
The repair was so easy!!! It took me less than ten minutes to remove the broken piece and to install the new piece. There were 2 screws to remove to get the broken piece off.
Was this instruction helpful to you?
Thank you for voting!