WDDW2 Frigidaire Washer - Parts

This washing machine water inlet valve has two ports for water to enter.

This is a screw and it is used with a variety of home appliances. It is less than 1/2 an inch long, and is #8-18 x 3/8. This part is a pan head, sheet metal, screw. It is made of metal.

This washing machine v-shaped belt is cloth covered.

Holds plated on Trunion .312-18 x 1.625.

This spacer goes between the timer knob and the dial.

Mounts at the base under the support.

This seal goes on top of the transmission below the agitator drive block.

Locking Plate.

This part aids in the spinning or agitating cycles.