Models > FWS1649ZAS0

FWS1649ZAS0 Frigidaire Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FWS1649ZAS0

Viewing 4 of 4
Cabinet/Top Diagram and Parts List for Frigidaire Washer
Cabinet/Top
Control Panel Diagram and Parts List for Frigidaire Washer
Control Panel
Motor/Tub Diagram and Parts List for Frigidaire Washer
Motor/Tub
Transmission Diagram and Parts List for Frigidaire Washer
Transmission
Keep searches simple, eg. "belt" or "pump".
Selector Knob – Part Number: 134844410
$54.01
This selector knob is a genuine OEM replacement part for either your washer or your dryer. The knob is used to select the cycle desired for your laundry. If the knob has become cracked or damaged it w...
In Stock
Order now and your part arrives by Mar 19
Drive V-Belt – Part Number: 134511600
$23.05
If your washer drum is not spinning, there may be an issue with your drive belt. The drive belt wraps around the motor pulley and helps the basket to spin. Other signs there are issues with the belt i...
In Stock
Order now and your part arrives by Mar 19
Tension Idler Pulley – Part Number: 131862900
This idler arm assembly comes with the pulley wheel.
No Longer Available
SCREW – Part Number: 131168200
$24.10
This is a screw and it is used with a variety of home appliances. It is less than 1/2 an inch long, and is #8-18 x 3/8. This part is a pan head, sheet metal, screw. It is made of metal.
In Stock
Order now and your part arrives by Mar 19
Washer Lid Lock with External Safety Switch – Part Number: 134101800
Mounting bracket on this part replaces old style ( You may need to drill off old bracket before mounting new lock).
No Longer Available
Dual Action Agitator – Part Number: 131605901
$118.17
This dual action agitator moves clothes during the wash cycle to improve cleaning and reduce tangling. It helps mix detergent and water evenly for better stain removal. If your washer isn’t cleaning w...
In Stock
Order now and your part arrives by Mar 19
Agitator Drive Block – Part Number: 134418700
No Longer Available
CLAMP – Part Number: 5304488479
$29.82
Clamp used for hoses.
In Stock
Order now and your part arrives by Mar 19
Washer Bolt – Part Number: 137539500
$29.82
Holds plated on Trunion .312-18 x 1.625.
In Stock
Order now and your part arrives by Mar 19
Water Inlet Hose Assembly – Part Number: 134211701
No Longer Available
Vertical Spring - Short – Part Number: 134886600
$45.27
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Pressure Switch – Part Number: 134680100
$77.56
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FWS1649ZAS0

Viewing 9 of 9
Burning smell
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing Fixing
How to fix it
Spins slowly
Fixed by these parts
Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing
How to fix it
Replacing the Drive V-Belt

Replacing the Drive V-Belt

Replacing the Selector Knob

Replacing the Selector Knob

Replacing the Washer Lid Lock with External Safety Switch

Replacing the Washer Lid Lock with External Safety Switch

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
rodney from fairfield bay, AR
Parts Used:
134511600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
replace broken drive belt
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub p ulley by hand to run belt on,release tension on idler arm.replace front panel and lower top.WALAAH!!!! you are done.
Read less
281 of 315 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BRIAN from UPLAND, CA
Parts Used:
131605901
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Clicking due to agitator dogs slipping
One bolt (after removing the fabric softener dispenser and a water tight cover you will see it). Remove the bolt and slide it straight up and then it's the reverse to put in the new one. Very simple repair and very inexpensive if you willing to do it yourself.
81 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jenessa from Tacoma, WA
Parts Used:
134101800
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Lid Lock Assembly broke
The Lid Lock Assembly came super fast! The install would have been flawless, but the "pre-drilled" holes on the new Lid Lock Assembly were way to small. We found that out after we had reconnected the wires and gotten it into place. Aside from that small set back, the install went great! This repair is definitey not one that you would need to pay a repair person to do!
Read less
76 of 95 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More