LC600DXF-1 Frigidaire Washer - Instructions

I used this website to look at the parts breakdown the only way water can get into the machine is thru the solenoid valve. Ordered valve.Followed the video on how to replace valve.I pulled apart the old valve. The plastic seat was cracked,letting water seep into the machine.

The washer was in the garage, and if you take off the top of the washer, the entire inside is un-insulated. THAT is why these things freeze and break in the cold. Turn off the water, un-hook the water hoses, remove the frozen valve body (two screws into the soap dispenser) and replace. The new part doesn't come with the rubber grommets that slide into the soap dispenser, so use your old ones. Put some WD-40 on the rubber grommets and push the valve body into the soap dispenser....it will slide in soooo much easier than without it. After screwing in the two screws to the soap dispenser, wrap the valve body loosely (but completely) with some fiberglass insulation. I insulated the whole inside of the washer (staying clear of the motor and belt) so that it would survive colder temps!

Quick google search brought me to this site, part was very easy to locate and purchase. The part was delivered within 5 days and 2 screws, 2 wires, 2 hoses, and 15 minutes later it was a done deal.