LC600DXW-1 Frigidaire Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Harry from New Orleans, LA
- Parts Used:
- 134211400
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Would not run or pump
Old part cracked
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from Carson City, NV
- Parts Used:
- 134371220
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Valve body froze and broke
The washer was in the garage, and if you take off the top of the washer, the entire inside is un-insulated. THAT is why these things freeze and break in the cold. Turn off the water, un-hook the water hoses, remove the frozen valve body (two screws into the soap dispenser) and replace. The new part doesn't come with the rubber grommets that slide into the soap dispenser, so use your old ones. Put some WD-40 on the rubber grommets and push the valve body into the soap dispenser....it will slide in soooo much easier than without it. After screwing in the two screws to the soap dispenser, wrap the valve body loosely (but completely) with some fiberglass insulation. I insulated the whole inside of the washer (staying clear of the motor and belt) so that it would survive colder temps!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BRENDA from BRECKENRIDGE, TX
- Parts Used:
- 134371220
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Valve was split causing water leakage
The ONLY problem is the lack of space to work. I took out the dispenser tube to the left but even with that the bottom screw on the inlet valve was a LOT harder to get back in than out. After putting everything back together there was still a drip from the valve. So I uninstalled, used some liquid gasket material on the entire surface connection. Reinstalled n works fine.
Was this instruction helpful to you?
Thank you for voting!