WFMC3301TC ((13)) Bosch Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from WOODLAND PARK, CO
- Parts Used:
- 00422244
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The old Cold water inlet valve was leaking
I followed the video and it was an easy repair. I took my time and it was an incredibly simple repair. The new part fit perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mike from gothenburg, NE
- Parts Used:
- 00436440
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Drain pump quit working
Took small door off front of machine pulled pump and unhooked wires. Hooked wires back up to new pump and installed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KEVIN from FORT MYERS, FL
- Parts Used:
- 00436440
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
washer would not drain
Took off top and back panels. Secured tub. Laid on side. Removed old pump. Cleaned up excess water with shopvac. Installed new pump. Tilt upright. Remove material used to secure tub. Reinstalled panels. Unplug everything before repair and use gloves. I cut up my hands on the panel to access pump.
Was this instruction helpful to you?
Thank you for voting!