WFMC6400UC-01 Bosch Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Francis from TEANECK, NJ
- Parts Used:
- 00420271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Socket set
Replacement of drain pump and shock absobers (Dampers), and drive belt.
The repair was simple.
I removed the front door, hinges, front metal panel, door rubber seal, top control panel, and rear panel of machine. Removed the existing drain pump and replaced with a new one. Removed both existing shocks and installed new ones, Reassembled the machine and everything worked just perfectly.
Frank
I removed the front door, hinges, front metal panel, door rubber seal, top control panel, and rear panel of machine. Removed the existing drain pump and replaced with a new one. Removed both existing shocks and installed new ones, Reassembled the machine and everything worked just perfectly.
Frank
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KEVIN from FORT MYERS, FL
- Parts Used:
- 00436440
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
washer would not drain
Took off top and back panels. Secured tub. Laid on side. Removed old pump. Cleaned up excess water with shopvac. Installed new pump. Tilt upright. Remove material used to secure tub. Reinstalled panels. Unplug everything before repair and use gloves. I cut up my hands on the panel to access pump.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mike from gothenburg, NE
- Parts Used:
- 00436440
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Drain pump quit working
Took small door off front of machine pulled pump and unhooked wires. Hooked wires back up to new pump and installed
Was this instruction helpful to you?
Thank you for voting!