Models > NTW4519JW2

NTW4519JW2 Amana Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for NTW4519JW2

Viewing 5 of 5
Basket And Tub Parts Diagram and Parts List for Amana Washer
Basket And Tub Parts
Controls And Water Inlet Parts Diagram and Parts List for Amana Washer
Controls And Water Inlet Parts
Gearcase, Motor And Pump Parts Diagram and Parts List for Amana Washer
Gearcase, Motor And Pump Parts
Optional Parts Diagram and Parts List for Amana Washer
Optional Parts
Top And Cabinet Parts Diagram and Parts List for Amana Washer
Top And Cabinet Parts
Keep searches simple, eg. "belt" or "pump".
Washer Drive Pulley – Part Number: W10721967
$39.63
The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
In Stock
Order now and your part arrives by Aug 22
Drive Hub Kit – Part Number: W10528947
$27.83
The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...
In Stock
Order now and your part arrives by Aug 22
Washing Machine Door Lock Assembly – Part Number: W11307244
$107.31
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
In Stock
Order now and your part arrives by Aug 22
Touch-Up Paint - White – Part Number: 72017
$24.15
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order now and your part arrives by Aug 22
Washer D-Shaped Knob Insert – Part Number: WP8536939
$9.79
This insert is sold individually. Knob not included. Knob is sold separately.
In Stock
Order now and your part arrives by Aug 22
Lid Hinge Mounting Screw – Part Number: WPW10119828
$7.60
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
In Stock
Order now and your part arrives by Aug 22
Washing Machine Upper Agitator – Part Number: W10836692
$82.04
This agitator is for washers. Agitator rotates back and forth to move the clothes inside the tub to clean the load. Unplug the washer before installing this part. Wear work gloves to protect your hands.
In Stock
Order now and your part arrives by Aug 22
Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699
$19.75
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
Special Order
Hose Clamp – Part Number: WP285655
$9.79
This hose clamp is sold individually.
In Stock
Order now and your part arrives by Aug 22
Lid Bumper – Part Number: WP9724509
$7.60
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
In Stock
Order now and your part arrives by Aug 22
STRIKE – Part Number: W10837741
$21.82
In Stock
Order now and your part arrives by Aug 22
ACTUATOR – Part Number: W11481722
$77.48
This shift actuator plays a key role in the operation of your washing machine by controlling the transition between spin and agitate modes. It also relays spin speed information to the control board, ...
In Stock
Order now and your part arrives by Aug 22
View More

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
January 7, 2026
Washer water pump motor won’t shut off after cycle ends. Will only stop when machine is unplugged. All other functions seem to work OK.
For model number NTW4519JW2
Fix.com logo
Hi Mark, thank you for reaching out. According to our research, the control board can enter a safety "flood mode" because its internal sensor falsely detects water or its internal power relay has physically welded shut. These failures keep electrical voltage flowing to the drain pump constantly, overriding the end-of-cycle command. You may need to replace the control board, part number FIX16744865. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
CNTRL-ELEC
$251.48
In Stock

Common Problems and Symptoms for NTW4519JW2

Viewing 16 of 16
Will not agitate
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Shaking and Moving
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Spins slowly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Locking Issues
Fixed by these parts
Fixing Fixing
How to fix it
Cycle Not Advancing
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Draining Issues
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Burning smell
Fixed by these parts
Fixing Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing Fixing
How to fix it
Timer Not Working
Fixed by these parts
Fixing Fixing
How to fix it
No hot or cold water
Fixed by these parts
Fixing
How to fix it
Replacing the Washer Drive Pulley

Replacing the Washer Drive Pulley

Replacing the Drive Hub Kit

Replacing the Drive Hub Kit

Replacing the Washing Machine Door Lock Assembly

Replacing the Washing Machine Door Lock Assembly

Replacing the Washer Drain Hose

Replacing the Washer Drain Hose

Replacing the Washer Gear Case

Replacing the Washer Gear Case

Replacing the Washing Machine Upper Agitator

Replacing the Washing Machine Upper Agitator

Replacing the Washer D-Shaped Knob Insert

Replacing the Washer D-Shaped Knob Insert

Replacing the Control Knob

Replacing the Control Knob

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from BLOOMINGTON, IN
Parts Used:
W10721967
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
71 of 106 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allison from RICHFORD, NY
Parts Used:
W10528947
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Hub had warn its grooved teeth off and washer wouldnt agitate
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Read less
65 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marquis from Augusta, GA
Parts Used:
W11607637
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Intermittent Starts and washer not going through the cycles properly
Pulled the washer away from the wall to get adequate space. Unplugged the power cord. Place the drain line from the wall into the washer's interior to prevent spills. Removed the plate behind the washer and the control panel using a nut driver. Took a picture so I knew where all the plugs go after installation. Then, I unplugged all wires that went into the control board. Then, I removed the control board while using needle-nose pliers to depress the restraint clips. Reassembled everything in the reverse order.
Read less
25 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More