Models > MLE2000AYW

MLE2000AYW Maytag Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MLE2000AYW

Viewing 18 of 18

Manuals & Guides for MLE2000AYW

Click to download
Keep searches simple, eg. "belt" or "pump".
This OEM drum support roller kit contains the parts needed to replace one roller on your dryer. This kit includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommen...
In Stock
This part is located on the front bulkhead of the dryer and helps the drum to rotate smoothly and quietly. If you notice a screeching or metal-on-metal noise while your appliance is operating, you may...
In Stock
$9.48
The roller shaft is also known as a support roller shaft or a drum roller axle. It is a part in your dryer that the drum rollers spin on, helping your dryer to tumble. If your appliance is noisy while...
In Stock
If your dryer is noisy while operating, or will not tumble at all, there may be an issue with the drum belt. Over time, the rubber can become brittle and snap, and the belt will need to be replaced. T...
In Stock
This is a genuine OEM replacement lint filter for your dryer. It measures approximately 12.5 inches in length and is made of a nylon mesh material. It is important that your dryer has a lint filter in...
In Stock
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is nois...
In Stock
If your dryer is making excessive noise, or it will not tumble, there may be an issue with the idler pulley wheel. The idler pulley wheel is attached to the idler bracket and is used to secure the dry...
In Stock
This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.
In Stock
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
In Stock
This seal can be used for the front or rear drum. Adhesive is NOT included. For adhesive search: WPY055980
In Stock
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
In Stock
$12.80
Sold individually.
In Stock
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MLE2000AYW

Viewing 20 of 20
Noisy
Fixed by these parts
How to fix it
Will not tumble
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
No heat or not enough heat
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Pumps but will not spin
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Takes too long to dry
Fixed by these parts
How to fix it
Marks left on clothes
Fixed by these parts
How to fix it
Shakes and moves
Fixed by these parts
How to fix it
Too hot
Fixed by these parts
How to fix it
Will not shut off
Fixed by these parts
How to fix it
Timer will not advance
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Shuts off too soon
Fixed by these parts
How to fix it
Spins slowly
Fixed by these parts
How to fix it
Will not agitate
Fixed by these parts
How to fix it
Will not stop filling with water
Fixed by these parts
How to fix it
Touchpad does not respond
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    gerry from west covina,, CA
  • Parts Used:
    306436, 12001541
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable), Wrench set
noisy rollers, broken latch
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you.
636 of 661 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Anthony from DeKalb, IL
  • Parts Used:
    WP33001808
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Lint into venting area.
Removal of old lint collector and replace with new one.
506 of 522 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer squeeking
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts.
507 of 541 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!