Models > 11089675800 > Parts

11089675800 Kenmore Washer Dryer Combo - Parts

Jump to:

13 - 24 of 290
Keep searches simple, eg. "belt" or "pump".
$22.91
This lid or door switch kit helps ensure your washer or dryer only runs when the door is properly closed. It’s a safety feature that prevents spills and keeps your appliance working as it should. The ...
In Stock
Order now and your part arrives by Nov 28
This black actuator spring with white rubber tip is used for both dryer doors and washer lids.
In Stock
Order now and your part arrives by Nov 28
Stop leaks before they start with this outer tub seal. It fits between the tub and base to keep water inside where it belongs. At about 2 inches across, this sturdy black gasket is built to last. Inst...
In Stock
Order now and your part arrives by Nov 28
This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches i...
In Stock
Order now and your part arrives by Nov 28
To help prevent leaks and keep it from slipping loose during operation, this appliance hose clamp holds a hose firmly against its connection. It applies pressure around the hose where it joins a pump ...
In Stock
Order now and your part arrives by Nov 28
This white female door catch is attached to the dryer door.
In Stock
Order now and your part arrives by Nov 28
This thermostat kit helps regulate your dryer’s temperature by cycling the heating element on and off. It’s adjustable between 135°F and 155°F and reactivates the heat when the temperature drops by 20...
In Stock
Order now and your part arrives by Nov 28
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Order now and your part arrives by Nov 28
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel...
In Stock
Order now and your part arrives by Nov 28
$7.60
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Nov 28
Replace the shaft of your left side drum support roller with this part from Whirlpool/Kenmore. This replacement shaft is 2-7/8 inches long. It is meant for use with many of Whirlpool/Kenmore's gas and...
In Stock
Order now and your part arrives by Nov 28
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
In Stock
Order now and your part arrives by Nov 28
13 - 24 of 290