Models > FFLE3911QW1 > Instructions

FFLE3911QW1 Frigidaire Washer Dryer Combo - Instructions

Jump to:

All Instructions for the FFLE3911QW1
106 - 120 of 310
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
April from CARYVILLE, TN
Parts Used:
5303281153
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Noisy
Took it apart and installed the parts. Then I threw the dryer in the trash and bought a new one.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from BROOKLYN, NY
Parts Used:
131658800
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Just popped the part I ordered right in and it's was closing in no time !
Just opened package and popped the part right in!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Batesburg, SC
Parts Used:
5303207102
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
strike broken
popped in one in
7 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allan D from REDLANDS, CA
Parts Used:
137551901
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
the attached anchors and holes linled up about 80% of the time.
I cut off the four that didn't line up - I suppose since this was a gasket that fit several makes, I should expect this type of problem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
james from tahlequah, OK
Parts Used:
5303281153
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
bearing went out
took apart and replaced parts easy to do but no one in my town can get me parts. thay want 100.00 gust to come out and look at it so found parts online and thats that
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Omar from Rumford, ME
Parts Used:
5304516871
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Damaged Filter
Took out the damaged lint filter and replaced with new one.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from CUMMING, GA
Parts Used:
134222900
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top hinge on clothes dryer separated, leaving door difficult to open/close
Ordered part from partselect.com. Part was back ordered; however they were very proactive in communicating status updates! When it arrived it was simply a matter of removing door using a philips screwdriver, installing the new hinge and presto - job complete! Kudos to partselect.com ??
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from DUNN, NC
Parts Used:
5304516871
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dryer lint filter was all torn up after 12 years of use.
Simple: I ordered the part from you then took out the old old and inserted the new one. Took all of 1 minutes
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from COLUMBUS, WI
Parts Used:
5304516871
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
lint screen had holes
took out the old one and put in the new one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ANGEL from MIAMI, FL
Parts Used:
5304516871
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
LINT FILTER
JUST DROP IT IN WOOOOLA
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randy from CENTENNIAL, CO
Parts Used:
5303281153
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Rear Bearing wearing out
I first looked at your directions then felt I could do the repair. So I ordered the part. The video was extremely helpful and allowed me to follow each step in the process. Last time I paid $270 for the exact repair. This time I costs me under $30. Plus I was able to clean out the entire inside of the dryer. The sitr instructions were very helpful and on target for any level of experience. I fixed my own dryer and saved a ton on it! Thank You, Randy In Colorado
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from MAYODAN, NC
Parts Used:
137292700
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
The drive belt snapped due to age
Removed front and back panels as well as the dryer front, placed belt on drum and drive motor. I found that taking the door off the dryer front made the reassembly much easer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from ALBUQUERQUE, NM
Parts Used:
134120900
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
quit heating
The repair went smoothly considering I am a rookie. The repair videos on your site are great. Followed the techs instructions and got thru it fine.

Thanks,

Jim
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
linda from rockport, TX
Parts Used:
137292700
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
dryer (combo unit) produced heat but would not tumble
I attempted to figure it out first but to no avail. Found an article on e-how and followed the steps to access the drum. Found your company on internet and called the 800 number to order the part. Delivery was quick (2 days) and it was the exact part. Thank you.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Troy from GOTHENBURG, NE
Parts Used:
137292700, 131825900
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Drum belt and bearing needed to be replaced.
Unplugged dryer, removed access panel on the back of dryer. Removed access panel on the front of the dryer. Removed the front panel of the dryer. Inside the drum, removed the three screws on the center bearings. Slide the bearing out of the bearing support. Replaced the bearing support. Then reassembled the drum. Replaced the belt an reassembled the dryer. Two people would be recommended for reassembly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FFLE3911QW1
106 - 120 of 310