KEBS276SBL0 KitchenAid Wall Oven - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Valley Center, CA
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken lint filter screen frame
This is hardly a "repair". You toss out the old lint screen and put the new one in. The hardest part was getting the lint screen out of the plastic bag it came in...
ta da it is done...
ta da it is done...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from North Attleboro, MA
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer lint filter had rips and holes
Researched for part on PartSelect, ordered part, arrived next day, cut open delivery package and plastic bag containing lint filter and placed new filter in dryer filter channel. Quick & super easy - my kind of DIY!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- william from salt lake city, UT
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint filter was old and had hole in it
ordered new filter,,,,
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Santa Maria, CA
- Parts Used:
- WP3177420
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
used up elec baking element
Unscrew the old one, pull it out, along with a few inches of wire. Use a couple of clothes pins to keep the wire escaping back behind the oven as you unhook them from the damaged (bad) one. Then reverse the process with the new one. No big deal. Works great now and the wife is happy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- M. Lyn from Arkansas City, KS
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter screen torn
Inserted new lint filter...one second! No tools needed. Price excellent!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brad from Georgetown, TX
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old lint filter had damaged screen
Took out the old lint filter and put in the new one. Works great
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from Pacific Palisades, CA
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint filter was frayed
used a utility knife to open the box in which the part was shipped, discarded the old filter and inserted the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Punta Gorda, FL
- Parts Used:
- WP3177420
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Burnt out baking element
After 26 years, the element burned out. I followed the diagrams on this website. Basically, I took out the screws that hold the element in place and carefully pulled the old element forward. The wires had fittings that slipped off the old element (with a little help from the wrench.) When the wires were disconnected, I clipped the adjustable wrench on the one of them to make sure they didn't slip back through the holes in the back of the oven. The old fittings slipped right onto the new element (couple of taps with a small hammer to get them all the way on). Them I slipped the wires back through the holes and put the two small screws in the plate at the back of the element. Quite simple, even for a guy with four thumbs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Sacramento, CA
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I relaced our worn out lint filter
My part was not amazing. What was genuinely cool: I ordered it one day and it was here the next, took out the old and put in the new. Thanks for getting it here so quickly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from WESTCHESTER, IL
- Parts Used:
- WP33002970
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
hole in filter
took out old and placed in new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- craig from PENFIELD, NY
- Parts Used:
- WP3177420
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bake element broke after 35 years of use.
Turned off breaker, verified that the breaker controlled the oven and was actually off.
This is important since you can still get a shock from leaks in the neutral side that may surprize you if you ground one side. Also some breakers can be mislabeled on older homes.
I removed the two screws holding the element to the back of the oven phillips #1 screw driver.
I carefully guided the wires and attached terminals out of the recess until
I had about 5 Inches of wire inside the oven exposed. Just be patient and careful, they will come out.
I then unpluged the wires from the old element and attached a binder clip to the ends so they could not slip back into the oven shell. Clothes pins are also a good choice or some duct tape.
I thoroughly cleaned the oven.
I then installed the wire terminals to the new element and reversed the removal procedure.
I then verified function and temperature of the oven settings.
It took me 10 minutes not including oven cleaning time.
This is important since you can still get a shock from leaks in the neutral side that may surprize you if you ground one side. Also some breakers can be mislabeled on older homes.
I removed the two screws holding the element to the back of the oven phillips #1 screw driver.
I carefully guided the wires and attached terminals out of the recess until
I had about 5 Inches of wire inside the oven exposed. Just be patient and careful, they will come out.
I then unpluged the wires from the old element and attached a binder clip to the ends so they could not slip back into the oven shell. Clothes pins are also a good choice or some duct tape.
I thoroughly cleaned the oven.
I then installed the wire terminals to the new element and reversed the removal procedure.
I then verified function and temperature of the oven settings.
It took me 10 minutes not including oven cleaning time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KENNETH R from NORTH ARLINGTON, NJ
- Parts Used:
- WP33002970
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint Filter With Hole In Mesh
Replaced with new part from PartSelect . Works Fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Wilmington, IL
- Parts Used:
- WP3177420
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken bake element
Remove to screws pull old element out, unplugged old element and plugged new element in. Replace screws and baked a cake
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gerald from Memphis, TN
- Parts Used:
- WP3177420
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
bake element borke
Removed the old element and replaced it with the new element. Very straight forward
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from ACWORTH, GA
- Parts Used:
- WP33002970
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Hole in old filter
Removed the old filter and slipped in the new one. Much nicer than original!
Was this instruction helpful to you?
Thank you for voting!