All Installation Instructions for Jenn-Air Wall Oven JJW9330DDW13

Customer:: peggy ann from forest city, NC
Parts Used:: 8009
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replaced oven lightbulb

very easy

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Tom from Altus, OK
Parts Used:: 12001656
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Oven would not turn on and get hot.

Our oven quit working again. I called the repair(dealer) man and he said we needed a new control panel. It would cost $180.00 and labor would be $60. The total repair would be $240.00. We considered just purchasing a new one. It is a slide-in range and they start at about $1500. So I began looking for a control panel on line. I found your web site and entered what was wrong with the oven. Your site suggested we try replacing the oven sensor. There was a video that showed how simple the repair was. We ordered the part. It came quickly and I immediately made the repair (about 10 min). I was very disappointed that it did not work. I went back to you web site and tried the next option. It was a terminal block for only $20.00. I didn't even know what a terminal block was, what it looked like or where on the range to find it. But I went again to your video and I learned quickly what to do. I ordered the part and it came in two days. I made the repair in about 15 min. My wife was very happy that the repair worked. Our total cost was about $80. The $240 quote would not have fixed the oven anyway. The repairman was wrong. I was very happy with the results and the money we saved.. Good Job PartSelect and thanks.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Kimbel from Rhoadesville, VA
Parts Used:: 12001656
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Varying heat

Removed two screws, unplugged the old unit, plugged in the new, screwed the new in. Job done. Would have been less than five minutes if I hadn't kept dropping the screws.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Schwenksville, PA
Parts Used:: 8009
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

oven light burnt out

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes

3 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Kevin from Virginia, IL
Parts Used:: 12001656
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

not heating/kicking oven off

Husband got on partselect.com and read reviews, we ordered a long oven sensor kit. When it came in the mail, I took it out and look at it, decided I could probably switch the part.... and so I did. Easy Breezy ... and it worked well

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Edgewood, WA
Parts Used:: 12001656
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Oven temperature lagging set temperature by almost 100F

Removed frame to cabinet lag screws
Slid oven out of cabinet (required because wire harness could not be pulled through inside of oven)
Removed two screws holding attaching sensor inside oven
Uncoupled wire harness
Installed new sensor in reverse order

Unfortunately, neither the new bake element or sensor fixed the problem, so I just ordered the more expensive control board -- hope that does it.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Don from Exchange, WV
Parts Used:: WP74008014
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Broken hinge

Took the door apart and replaced the hinge, very easy

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: george from San Antonio, TX
Parts Used:: 12001656
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Pliers, Screw drivers, Wrench set

Oven would not work

Installed new thermostat. Went well. Now the oven comes on and it takes 2.5 hours to come up to 250 degrees. Help!

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Judith from Phoenix, AZ
Parts Used:: 8009
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Bulb Replacement

I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Atkinson, NH
Parts Used:: WPW10310258
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The broil would heat but the bake would not heat

I watched your video and read how easy the repair was to do from other buyers. I called sears and they wanted $125.00 just for the service call and automatic 1 hour labor and did not include parts and a 8 day wait for the service call.I called your number and explained my problem and was told what to order. The element was ordered on Easter Sunday and arrived on Tuesday. It took 5 minutes to install. Thank you

Was this instruction helpful to you?

Customer:: Antonio from Davie, FL
Parts Used:: WP74008014
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Door Hinge broken

I followed the online video at Jennair.com. The repair was easy and I saved quite a bit of money. I was quoted a price of $534.00 to replace the door hinges, I did it for $96.00 including overnight shipping chargers. I am a very happy lady.

Was this instruction helpful to you?

Customer:: John from Dacula, GA
Parts Used:: 12001656
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Fan runs continually ,door locked,error code f2,f3,f7

Turned off breaker,opened door with bent coat hanger by sliding right to left the coat hanger to open the door, remover 2 screws holding in the sensor in upper left corner of the oven. Remove the sensor (gently) with the wire connection from back of oven pulling sensor out a out 8 inches . Disconnect plug. Install new sensor with matched harness /.connection, installed 2 screws ,turned on breaker.

Was this instruction helpful to you?

Customer:: Michael from Bay City, MI
Parts Used:: WPW10210594
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Convection fan not running

This was a really easy fix... All I needed to do was remove the door and racks from the oven, remove 3 screws from the fan cover and another 4 screws from the fan itself, disconnect the two wires (keep track which side each was on) remove fan from oven. I then took the new fan, connected the wires installed the screws and door and Done! Now for the moment of truth the test... Works Great!! Easily cut my repair bill in half by doing it my self... no repairman costs, not travel charge, and no markup on the part:)

Was this instruction helpful to you?

Customer:: Lloyd from Eau Claire, WI
Parts Used:: 12001656
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

change oven sensor

Followed provided video

Was this instruction helpful to you?

Customer:: Bob from Seneca, SC
Parts Used:: WP71001841
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Replace Oven Door Seal

Read previous repair story

Was this instruction helpful to you?

JJW9330DDW13 Jenn-Air Wall Oven - Instructions