SVE47600WC Jenn-Air Wall Oven - Instructions

Removed two phillips head screws, pulled the element out until the prongs were exposed, pulled off the wire connectors and removed the bad element. After plugging the wires onto the new element, I pushed it back in and replaced the two screws. Easy job! Your web site is wonderful!

Husband got on partselect.com and read reviews, we ordered a long oven sensor kit. When it came in the mail, I took it out and look at it, decided I could probably switch the part.... and so I did. Easy Breezy ... and it worked well

first I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires then I took new element and plug the wires in it pushed the element back in place and replaced the two screws

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes

We had a wood tray in the oven (yes i know) and it is a two stacked oven and turned the wrong oven to broil. The fire was put out quickly but the Latch door switch and assembly was damaged.
The 3D breakout of the appliance made it a jiffy to select the correct part numbers. Shipping is very good from Parts Select.
The Front assembly for the lower oven comes out with 6 screws. Disconnect the Door Switch Connector push it out and replace that. The Latch Assembly requires a small wrench. It is a bad design but patience will get you there. Once the assembly is out disconnect electrical connectors. Don't worry each connector is unique I advice do it one for one.
Overall you need a skill of three stars out of five to complete this task

I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.

Installed new thermostat. Went well. Now the oven comes on and it takes 2.5 hours to come up to 250 degrees. Help!

I simply removed the old filter and replaced it w/the new filter. It came in record time and I'm very pleased w/the service I received.

Removed the old filter from the top of stove and put the new one in. Took about 10 seconds.

I just had to drop the grease filter into the slot. It took less than a second. But what I am really pleased with is that it took less than a day and a half to get the part. I ordered it on thursday morning. It was shipped on thursday afternoon and in my driveway by friday noon!!! Wow!!! How great was that!!!!!! The fastest service I've every had for anything!! Bravo!!!!!!!! To all your workers!!!!! Rrm

I unscrewed the two screws holding the element to the back of the oven. Pulled slowly until the wires appeared. Disconnected the females from males on element. Went to the computer pulled up PartSelect compared pictures and measurements with mine. Ordered the part. Received it in 3 days (thank you) and installed it in 5 minutes before I left for work the following morning. Thank you very much. This was the easiest repair I've completed and I owe it to you. Thank you!!! Christian J. Russo

The repair was very easy. I took off the protective covering, the electrical wiring and disconnected the wire to the oven element. Then pulled out the element and put in the new one, put the protective covering back and plugged in the electrical outlet and was finished. The time that I received the new element from the parts store was lest than four days super time and repair thank you.

Removed old filter, dropped in new filter. A breeze! What was best of all, is that Parts Select shipped the filter immediately and it arrived within just a day or so! Well done!

The new replacement grease filter came without damage and it was a simple task of removing the old and setting the new in it's place. No tools were required.

Very easy to replace the filter, nothing to it, take out the old filter and put in the new filter.