Models > JTP25SH6SS > Instructions

JTP25SH6SS General Electric Wall Oven - Instructions

Jump to:

All Instructions for the JTP25SH6SS
91 - 105 of 105
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Vicki from Irvine, CA
Parts Used:
WB48T10095
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced damaged oven rack
I ordered the oven rack on a Tuesday and received it the very next day - was wowed at the service.
Was this instruction helpful to you?
Thank you for voting!
Customer:
andrew from pittstown, NJ
Parts Used:
WB44T10043
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Broil element on top oven was not working
Shut the power off at the electric box.Disconnected coil from roof clips.Pulled wire connection from back wall. Disconnected wire clips, connected new unit.Clipped to roof and turned on" Working fine".
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Acme, WA
Parts Used:
WB23T10015
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
oven temp. was not what setting called for
turned oven off, pulled oven out from wall, removed back of oven, unscrewed sensor from oven replaced with new sensor, put back on, turned power to oven on, tried oven at 425, my temp. gage and the oven temp matched. a very easy fix.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JTP25SH6SS
91 - 105 of 105