Models > JRP15WP2WG > Instructions

JRP15WP2WG General Electric Wall Oven - Instructions

Jump to:

All Instructions for the JRP15WP2WG
76 - 84 of 84
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Donald from N Las Vegas, NV
Parts Used:
WB44K5013
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Lower Element Partially Heating
I removed the two screws holding the element in, pulled it out, and unplugged it. Installation was reverse of removal. It's just that simple.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DANNY from GROVE CITY, OH
Parts Used:
WB44K5013
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
element was bad, not heating
had two screws to remove from old element, than removed two electric wires from the old element and put the new element back in by putting the wires on the new element and reinstalling the element back in place with two screws and it was done. took about 5 mins. to complete. easy.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JRP15WP2WG
76 - 84 of 84