Models > GE5600H0A > Instructions

GE5600H0A General Electric Wall Oven - Instructions

Jump to:

All Instructions for the GE5600H0A
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Pat from Riverside, CA
Parts Used:
WB19K14
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
gas leak at the oven oriface from the gas valve
layed the range on its side and removed the gas valve installed the new valve leak checked and tested works like new. Great service and parts availability, shipping was fast.
9 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffrey from Methuen, MA
Parts Used:
WB19K14
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench (Adjustable), Wrench set
Smell of natural gas from range when oven is off
First diagnose where the smell of natural gas is coming from, mine was the range. On my model oven there is a small red shut off valve on the regulator. Turn that valve of and see if the smell goes away. If it does then the problem is with the Dual Oven Safety Valve. Order a new valve. First shut off gas to oven and disconnect gas line. I found it easier to replace the valve with the oven on its side. Once you find the valve location loosen the 3 gas lines and remove two mounting screws that hold the valve to the oven frame. Remove old valve and install new in reverse order. Be careful when reconnecting the 3 gas lines not to cross thread or over torque. Reconnect gas line and turn on gas.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GE5600H0A
1 - 2 of 2