Models > YM71SS

YM71SS (41ADY71C901) Yard Man Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$30.42
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes...
In Stock
This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...
In Stock
This is a genuine OEM replacement throttle trigger (red). The throttle trigger is responsible for managing the speed of the engine. The throttle cable attaches to the trigger, which connects to the th...
In Stock
This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is ...
In Stock
This gearbox is for line trimmers. Gearbox contains the gears that turn the line spool for cutting.
In Stock
This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.
In Stock
$9.25
In Stock
In Stock
In Stock
In Stock
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for YM71SS

Viewing 2 of 2
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Engine revs but trimmer head will not turn
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Erik from ROBERTSDALE, AL
  • Parts Used:
    753-06183
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    William from PALMETTO, FL
  • Parts Used:
    753-06185, 753-06190
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Carburetor replacement
Removed 2 screws securing the air cleaner and carburetor to the engine using a T25 Torx driver. then removed the throttle cable from the carb.Then removed the o ring gasket from the engine and replaced with a new one and replaced the carb etc. Primed it and fired it up.Runs just like new.
7 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Ronald from TOOL, TX
  • Parts Used:
    753-08164, 753-06571
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
The gear ssembley was not turning
I ordered the gear assembley and the boom assembley and I stalled them.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!