Models
>
RY252CS
RY252CS Ryobi Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RY252CS
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This is a spool retainer for your trimmer. You may also know this part as a bump knob. It is a right-hand thread screw to remove and attach to your trimmer head. Inside the spool housing, it holds the...
No Longer Available
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Russell
September 29, 2021
I'm trying to locate a replacement for the stop switch
For model number RY252CS
Hello Russell, Thank you for writing. Sadly, the part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Their phone number is 1-800-860-4050. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.
Was this helpful?
Thank you for voting!
Common Problems and Symptoms for RY252CS
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from MANCHESTR CTR, VT
- Parts Used:
- 307486001
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Old curved shaft for Ryobi had seized-up and wouldn't turn
I have been using string trimmers for over 40 years now, doing the grounds work at a small motel, and this is the best combination I have found!
I have the new 40V battery carbon fiber shaft model, but I use the curved shaft. I have stacked stone walls and many obstacles to get around, and the curved shaft works best. But, Ry ... Read more obi sends their straight shaft with the new trimmer, and it turns in the opposite direction (counter clockwise) and is hard for me to get into the areas I need.
To correct this, I use the Oregon brand Gatorhead, which fits on the Ryobi with no modiification (easy) and the line comes in spiral discs which can work for either direction of trimmer head to dispense effortlessly. Now, I have a new curved shaft on a new trimmer with the head turning in the clockwise direction.
This item has been discontinued, so get it when you find one, and stock up on line discs too!
https://www.oregonproducts.com/en/gator%c2%ae-speedload%e2%84%a2-trimmer-head-pro-sm/p/24-250
I have the new 40V battery carbon fiber shaft model, but I use the curved shaft. I have stacked stone walls and many obstacles to get around, and the curved shaft works best. But, Ry ... Read more obi sends their straight shaft with the new trimmer, and it turns in the opposite direction (counter clockwise) and is hard for me to get into the areas I need.
To correct this, I use the Oregon brand Gatorhead, which fits on the Ryobi with no modiification (easy) and the line comes in spiral discs which can work for either direction of trimmer head to dispense effortlessly. Now, I have a new curved shaft on a new trimmer with the head turning in the clockwise direction.
This item has been discontinued, so get it when you find one, and stock up on line discs too!
https://www.oregonproducts.com/en/gator%c2%ae-speedload%e2%84%a2-trimmer-head-pro-sm/p/24-250
Read less
Was this instruction helpful to you?
Thank you for voting!