Models > RY34007

RY34007 (090432017) Ryobi Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bump Knob – Part Number: 308042002
This is a spool retainer for your trimmer. You may also know this part as a bump knob. It is a right-hand thread screw to remove and attach to your trimmer head. Inside the spool housing, it holds the...
No Longer Available
Spool Retainer (Red-LH Thread) – Part Number: 308042003
$6.25
This is an OEM replacement part. It has a left hand threaded screw to remove and attach it to the trimmer head. Its purpose is to hold the spool with the cutting line, in the spool housing. It also ...
In Stock
Order now and your part arrives by Mar 22
Grass Deflector Assembly – Part Number: T308744001
This is a grass deflector assembly for a trimmer. Your model may have a straight deflector and a curved shaft deflector, and this one is considered the curved shaft deflector. Its purpose is to help p...
No Longer Available
Trimmer String Head Adapter – Part Number: 678019002
$5.19
Genuine OEM replacement part, this part is sold individually. This part is where the stringhead assembly is mounted on the Trimmers shown below. It attaches to the spindle. The thread mount on the sp...
Special Order
String Head Assembly – Part Number: 309562008
Genuine Ryobi replacement part, this assembly is sold individually. This is the part of the trimmers shown below that contains the cutting line,string head housing,spring and spool with the cutting li...
No Longer Available
Carburetor Assembly – Part Number: 309375002
This carburetor is for line trimmers. Carburetor mixes air and gas before the fuel mix goes to the engine. Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
No Longer Available
Fuel Tank Assembly – Part Number: 310585012
This OEM sourced replacement fuel tank assembly is designed for use with Ryobi string trimmers. It is made out of plastic and it includes the fuel tank, fuel lines, fuel cap and the fuel filter. Pleas...
No Longer Available
Fuel Filter – Part Number: 310976001
$2.99
This is a genuine OEM approved replacement part designed for use with a variety of handheld lawn and garden equipment. This is an in-tank fuel filter which makes sure that the fuel delivered to the en...
In Stock
Order now and your part arrives by Mar 22
Clutch – Part Number: 300960002
$6.70
This is an OEM sourced replacement part used on gas trimmers. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driv...
In Stock
Order now and your part arrives by Mar 22
SPARK PLUG – Part Number: 870301002
$6.28
In Stock
Order now and your part arrives by Mar 22
Trimmer Starter Rope – Part Number: 900849002
$6.25
This is a genuine OEM sourced replacement starter rope, not an aftermarket equivalent. This part is used to pull start Homelite and Ryobi handheld lawn and garden equipment. This rope is made from dur...
In Stock
Order now and your part arrives by Mar 22
Flanged Washer – Part Number: 678011002
This flanged washer is an OEM sourced replacement part that is made for Ryobi and Homelite handheld string trimmers. The washer has internal gears that allow it to engage with the gear head shaft and ...
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for RY34007

Viewing 1 of 1
Engine revs but trimmer head will not turn
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tim from HOLLISTER, CA
Parts Used:
308035047
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Replaced straight shaft, and the gear head.
Removed the 2 bolts holding the gear head to shaft. On my model I had to remove the complete trimmer head, then using 2 wrench take the trimmer head adapter off the gear heD. One video showed simply putting a screwdriver in the notch behind trimmer head and unscrewing complete head. Mine of course was slightly more involved but still qui te easy once I saw what needed to be done.
Read less
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MIKE from LOXAHATCHEE, FL
Parts Used:
309375002
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from MANCHESTR CTR, VT
Parts Used:
307486001
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Old curved shaft for Ryobi had seized-up and wouldn't turn
I have been using string trimmers for over 40 years now, doing the grounds work at a small motel, and this is the best combination I have found!

I have the new 40V battery carbon fiber shaft model, but I use the curved shaft. I have stacked stone walls and many obstacles to get around, and the curved shaft works best. But, Ry obi sends their straight shaft with the new trimmer, and it turns in the opposite direction (counter clockwise) and is hard for me to get into the areas I need.

To correct this, I use the Oregon brand Gatorhead, which fits on the Ryobi with no modiification (easy) and the line comes in spiral discs which can work for either direction of trimmer head to dispense effortlessly. Now, I have a new curved shaft on a new trimmer with the head turning in the clockwise direction.

This item has been discontinued, so get it when you find one, and stock up on line discs too!

https://www.oregonproducts.com/en/gator%c2%ae-speedload%e2%84%a2-trimmer-head-pro-sm/p/24-250
Read less
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More