Models
>
41ADZ03C758
41ADZ03C758 MTD Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$34.03
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes...
In Stock
$13.64
This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...
In Stock
$23.15
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 41ADZ03C758
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- CV from Shasta Lake, CA
- Parts Used:
- 753-06330
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Broken lower drive shaft cable (engine runs fine, trimmer string head doesn't spin).
Remove lower shaft housing alignment set screw, and bolt clamp that connects the lower and upper drive shaft housing. Then remove the 6 star head screws that hold split housing for the drive gears, and carefully split and separate the housing. Remove the broken drive shaft cable. Grease the replacement drive shaft cable full length (ver
... Read more
y important), and re-grease the drive gears before reassembly. Very quick and easy repair. Just be sure to grease the cable heavily full length, and the coupler that connects the upper and lower cables.
Read less
Was this instruction helpful to you?
Thank you for voting!