Models > 316794460

316794460 (41ADZ3CC799) Craftsman Trimmer

Jump to:

Find Part by Name

Most Popular Parts for 316794460

Trimmer Carburetor

$51.57

A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, ...

Order now and your part arrives by May 16

Trimmer Bump Head Knob

$21.24

This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...

Order now and your part arrives by May 16

Fuel Tank Assembly

$21.78

This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is ...

Order now and your part arrives by May 16

Carriage Bolt 5/16-18 x 3/4" Lg.

$6.51

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the b...

Order now and your part arrives by May 16

Spark Plug

$11.59

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combust...

Order now and your part arrives by May 16

Line Trimmer Spool

$30.08

This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.

Order now and your part arrives by May 16

Clutch Asm Small

★★★★★

(1)

$37.28

Genuine OEM replacement kit used on Gas Trimmers and Tillers. This part includes: Clutch Drum, Clutch, Clutch Washer and the Screw which has a left-handed thread. A centrifugal clutch is a part that u...

Order now and your part arrives by May 16

Spring-spool

$17.25

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose...

Order now and your part arrives by May 16

Aircleaner Filter

$6.51

This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and ...

Order now and your part arrives by May 16

Carburetor Gasket

$6.51

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carbure...

Order now and your part arrives by May 16

Carburetor O-ring

$6.51

This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburet...

Order now and your part arrives by May 16

Knob-wing 5/16-18

$7.98

This is a genuine OEM sourced replacement part designed for use with lawn mowers. This wing knob helps to secure upper and lower handles on a mower. It is made out of red plastic and it is sold indivi...

Order now and your part arrives by May 16

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 316794460

Viewing 4 of 4

Will Not Start

Fixed by these parts

How to fix it

Engine stops after a few seconds or minutes

Fixed by these parts

How to fix it

Cutting line does not come out

Fixed by these parts

How to fix it

Engine revs but trimmer head will not turn

Fixed by these parts

How to fix it

Installation Instructions for 316794460 Provided by Fix customers like you

Viewing 3 of 8

Customer:: Erik from ROBERTSDALE, AL
Parts Used:: 753-06183
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Fuel line broke

Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.

13 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: john from SHARPSVILLE, PA
Parts Used:: 753-06253, 753-06190
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins

string trimmer would not start

emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines o ... Read more

Read less

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Timothy from GAINESBORO, TN
Parts Used:: 753-06530
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Wrench (Adjustable)

Replace Starter Housing with broken pull cord.

1. Remove Shaft & clutch cover by removing 3 torx screws and loosening cinch bolt.

2. Remove clutch assembly with torx tool in center and then by cinching the shaft and turning spring assembly counter clockwise with an adjustable wrench.

3. Remove starter housing by removing 3 Torx bolts from the front and a screw ... Read more

Read less

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?