LST136B (Type 2) Black and Decker Trimmer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from SPRINGFIELD, PA
- Parts Used:
- 90570298N
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Renew Your String Trimmer is Easy
The plastic outer housing of my B&D trimmer steadily wore out as the lower bearing location vibrated away. But with the new part, and a separate rotating assembly, it's as good as new (and may have been OK with just the housing change).
6 or 8 Phillips screws and R&R of a stress relief inside the housing was all it took to swap out the old motor/assembly and be as good as new. No disconnection of wires, and easy repair.
6 or 8 Phillips screws and R&R of a stress relief inside the housing was all it took to swap out the old motor/assembly and be as good as new. No disconnection of wires, and easy repair.
Was this instruction helpful to you?
Thank you for voting!